# Unboxing and Assembly Instructions

> Unboxing and Assembly Instructions for Your GLAMCOR HORIZON ECLIPSE Light

## What’s in the Box 🎁

**When you open the box, you’ll find:**

✅Stand

✅Stand base

✅Wheels

✅Tool kit (including wrench key and spacers)

✅Goggles

✅Power plug

✅Light with integrated arm extension

## 💡 Assembly Instructions for Your GLAMCOR HORIZON ECLIPSE Light

**Step 1: Remove the Stand from the Box**

Carefully take the stand out of the packaging.

**Step 2: Remove the Base and Install the Wheels**

Take the base out of the box, flip it upside down, and prepare for wheel installation.

**Step 3: Install the Wheels**

1. Align the screw of each wheel with the hole in the base.
2. Use your fingers or the wrench key to start turning the screw.
3. Once the wheel touches the base, use the hex key to tighten it until it’s fully secured. Stop turning when the key can no longer move.
4. Repeat for all wheels.

**Step 4: Attach the Stand to the Base**

1. Position the stand upright.
2. Align the stand with the base and securely attach it using the provided tools.

**Step 5: Adjust the Light and Arm Extension**

The light and arm extension come as a single unit, simplifying setup. Adjust the angle and length based on the width of your esthetician bed:

- **If your bed is wider than 23 inches:**
  - Press the adjustment button to make the arm parallel to the bed.
  - Release the button to lock the arm in place.
  - Extend the arm to ensure the light shines directly on your client’s face.
- **If your bed is 23 inches or less:**
  - Press the adjustment button to align the arm vertically.
  - Use the 180-degree rotator to bend the light downward.
  - Ensure the light is perfectly aligned with your client’s face.

**And voila! ✨**Your GLAMCOR Horizon Eclipse light is now ready to provide optimal illumination and LED skincare therapy for your professional treatments.

Source: https://glamcor.clay.imek-dev.com/pro-led-light-therapy/horizon-eclipse/unboxing-and-assembly-instructions